The water surface is one of the scenes often seen in the construction of sand table model. Different sand table models reflect different water surfaces. In general, water surface models are made according to the style and share of sand table models. So, how is the water surface in the construction model made?

1、在制造修建模型份额尺较大的水面时，需求考虑水面和路面的高度差。一般一般选用的办法是，先将底盘上水面部分进行漏空处理，然后将通明有机玻璃板或带有纹路的通明塑料板按规划高差贴于漏空处，并用蓝色自喷漆在通明板下面喷上色彩即可。用这种办法体现水面，一方面可以将水面与鲈鱼的高差体现出来;另一方面通明板在阳光照耀和底层蓝色漆面的反衬下，其仿真作用十分好。

1. The height difference between water surface and pavement shall be considered when manufacturing and building water surface with large scale of model. The general method is to first treat the leakage of the water surface on the chassis, then paste the transparent plexiglass plate or transparent plastic plate with grain on the leakage according to the planned height difference, and spray color under the transparent plate with blue self spraying paint. Using this method to reflect the water surface, on the one hand, it can reflect the height difference between the water surface and bass; On the other hand, the simulation effect of transparent board is very good under the contrast of sunlight and bottom blue paint.

2、在制造修建模型份额尺较小的水面时，水面与路面的高差就可以疏忽不计。制造时，可直接用蓝色即时贴按其形状进行裁剪。裁剪后，按其地址部位张贴即可。别的，还可以运用遮挡上色法进行处理。其做法是，先将遮挡膜贴于水面方位，然后进行漏刻。刻好后，用蓝色自喷漆进行喷色。待漆枯燥后，将遮挡膜揭掉即可。

2. When building the water surface with a small scale of the model, the height difference between the water surface and the pavement can be neglected. During manufacturing, blue instant stickers can be directly cut according to their shape. After cutting, it can be posted according to its address. In addition, the occlusion coloring method can also be used for processing. The method is to stick the shielding film on the water surface first, and then make missed engraving. After engraving, spray color with blue self painting. After the paint is dry, remove the shielding film.

修建模型中水面的制造办法十分的多，为更都好的展现修建沙盘模型的实在作用，在许多模型制造时现已纷繁选用仿真动感水来进行制造。

There are many manufacturing methods of water surface in building models. In order to better show the practical role of building sand table models, simulation dynamic water has been widely used in many model manufacturing.