In the process of making model walls, multiple scale drawings or patterns are made as the basis for making detailed reliefs or decorations. Cut the scale of the four walls and use it as a template. Choose the materials to make the wall, such as tile paper, put the template on it, draw the outline with pencil, and then cut or cut according to the outline.

　　各种纸张用裁切的方法或裁切。如果要切泡沫板，必须用刀，拔出的刀片应比泡沫板厚三至四倍。切割时，人应站起来进行切割，握刀时，刀刃应垂直，刀与板应切成45度，刀刃应用力。这样可以有效的利用边缘，延长粘接面产生热摩擦，使切割后的泡沫板边缘不易产生颗粒或裂纹。假如要用泡沫板复制人字形屋顶，除了要在每一个要点以上重复外，两块板也要根据屋脊的角度切割。

　　All kinds of paper are cut by means of cutting. If you want to cut the foam board, you must use a knife, and the blade should be three to four times thicker than the foam board. When cutting, people should stand up to cut. When holding the knife, the blade should be vertical, the knife and the plate should be cut into 45 degrees, and the blade application force. This can effectively use the edge, extend the adhesive surface to generate thermal friction, so that the edge of the cutting foam board is not easy to produce particles or cracks. If you want to use a foam board to duplicate the human shaped roof, you should cut the two boards according to the angle of the ridge, in addition to repeating every point.

　　模仿建筑物的装饰和装饰图案。加工时宜先做粗装饰，后做细节加工。在细化模型时，工作组必须讨论工作分配，工作必须清晰，便于分步建模。由于细致的装饰多为浮雕图案，故群体有适宜可塑性高的多用材料，如纸黏土和黏土(黏土一定要烧制，如条件不允许，可改用黏土。泥浆的优点是它有颜色，缺点是容易变形。

　　Imitate the decorations and patterns of buildings. When processing, it is advisable to do rough decoration first, and then detail processing. When refining the model, the working group must discuss the assignment of work, and the work must be clear, so as to facilitate step-by-step modeling. Because the detailed decoration is mostly relief pattern, the group has suitable multi-purpose materials with high plasticity, such as paper clay and clay (clay must be fired, if conditions do not allow, clay can be used instead). The advantage of mud is that it has color and the disadvantage is that it is easy to deform.

　　如中国建筑人字形屋脊，常隆起，高而翘曲，构成复杂的雕塑。在制作时，可以先画好图纸，剪出纸样，然后在回形针或胶水上粘贴瓦片纸上打印的轮廓，再剪出纸板。不要使用泡沫板，因为泡沫板可能太厚。这是形式上的，不是细节上的。团队成员可以用纸粘土在上面做浮雕，用胶水或便利贴粘贴，完成后上色。

　　For example, the herringbone ridge of Chinese architecture is often raised, high and warped, forming a complex sculpture. When making, you can draw the paper first, cut out the paper pattern, then paste the outline printed on the tile paper on the paper clip or glue, and then cut out the cardboard. Do not use foam board, because the foam board may be too thick. This is formal, not detailed. Team members can use paper and clay to make reliefs, glue or post it notes, and then color it.

　　又如西式建筑，墙壁的装饰比较中式华丽，即使一扇窗户也经常用厚石头做窗边浮雕。需要更多的纸张样本的复印件，工作分配也很清楚。如果一个团队成员遇到这种窗玻璃，他们必须把整个窗户和纸墙的花边剪下来，把轮廓放在透明的薄膜上，把薄膜剪下来做成玻璃窗。窗框是在硬纸板上印刷，然后放置在透明薄膜上，这样一个窗口组件完成了一半。，用泡沫板裁出胶粒或胶板，将窗口边缘围成一个粗石的效果，然后用胶带纸或胶水糊上，一块粗石边缘浮雕出透明的窗口大致是密实的。

　　Also like western architecture, the wall decoration is more Chinese style gorgeous, even a window is often made of thick stone window relief. More copies of paper samples are needed and the assignment is clear. If a team member encounters this kind of window glass, they must cut the lace of the whole window and paper wall, put the outline on the transparent film, and cut the film to make a glass window. The window frame is printed on cardboard and then placed on a transparent film, so that a window component is half finished. Finally, use foam board to cut out colloidal particles or rubber sheets, and encircling the edge of the window into a rough stone. Then use adhesive tape or glue to paste it. A transparent window on the edge of a rough stone is roughly dense.

　　以上就是对潍坊模型公司不同类型的建筑模型墙面材料的需求的详细介绍，想要了解更多请点击官网http://www.jnsymx.com

　　The above is a detailed introduction to the requirements of different types of building model wall materials of Weifang model company. To learn more, please click http://www.jnsymx.com